cod
Active Member
I am installing or will have my marina install (4) Underwater lights. My question is should the bottom paint be removed at the location where the fixture mounts to the hull. Nothing in the manufacturers instructions mentions removing the bottom paint. It only mentions coating the thru hole and the back of the fixture thoroughly with marine grade 4200 sealant.
Im thinking that as long as the bottom paint is sanded and properly adhered to the hull, it should be fine and maybe better to leave it rather than have the bare fibergLass but need some expert advice on this.
Im thinking that as long as the bottom paint is sanded and properly adhered to the hull, it should be fine and maybe better to leave it rather than have the bare fibergLass but need some expert advice on this.