Bumperlt
New Member
Bow roller is mounted with 4x 3/8x2". Yesterday I tried to use the 1.5" bolts, but they were too short, so there's a lot of material there to grab onto. My anchor is a 16lb claw type. My question is this: Do I need to mount another cleat somewhere up there with some strong backing for to tie the anchor off to while at anchor, or can I use the bow roller? I'm still pondering how I'm going to hold the anchor up while not at anchor, but I'm hoping I can hit two birds with one stone and the means holding the anchor up, can also hold the boat while at anchor.