fins1up
New Member
I'm adding some additional electronics to my 280 Sundancer. It appears the starboard wall in the aft cabin is removable which might allow access to the wiring between the engine room in front of the gen set and the helm station wiring also on the starboard side of the boat. Problem is, this access panel does not seem to want to come out. Any one know of a special "trick" to remove it?
The panel has a locking strip across the bottom with three screws in it. I've removed that strip but it still seems there is something else holding it.
Any ideas or suggestions would be greatly appreciated!
The panel has a locking strip across the bottom with three screws in it. I've removed that strip but it still seems there is something else holding it.
Any ideas or suggestions would be greatly appreciated!