AC filters for 1997 400 Sedan Bridge

[stevec]

Both my AC units need new filters. The previous owner duct tapes some filters to the units and I want to get the OEM filters. Does anyone know what the part number would be and where I can purchase them?

Thanks,
Steve

 

[mistercomputerman]

Try this

http://www.dometic.com/14f96ac6-819f-467f-aa9f-ef24bd6df5e5.fodoc

 

[stevec]

Those look great! No I have to figure out what model(s) I have on the boat.

 

[Mike Blake]

measure the front of the evaporator,then look at the sizes they have.

 

[stevec]

measure the front of the evaporator,then look at the sizes they have.

Thanks, Mike...will do. Have to wait until this weekend, though. Do you have a certain place you buy from?

 

[mistercomputerman]

Parts manual for your boat

http://www.searay.com/boat_graphics/electronic_brochure/Company1729/1C1_24_74DEIPR3F9I.pdf

 

[Mike Blake]

Thanks, Mike...will do. Have to wait until this weekend, though. Do you have a certain place you buy from?

Stevec: I made Stainless steel brackets for mine. The I just go to Home Depot 3-4 $$ I Change them every 2 months

 

[stevec]

Parts manual for your boat

http://www.searay.com/boat_graphics/electronic_brochure/Company1729/1C1_24_74DEIPR3F9I.pdf

Thanks...I have that manual. That's the first place I looked, but it does not tell me the model number or brand of the AC unit. It looks like I am going to have to wait until I can get down to the boat this weekend to get that information and/or measure the size of the filter I need.

 

[stevec]

Stevec: I made Stainless steel brackets for mine. The I just go to Home Depot 3-4 $$ I Change them every 2 months

That's a good idea! How did you attach the brakcets? Do you just use the normal house filters from Home Depot?

-Steve

 

[Mike Blake]

That's a good idea! How did you attach the brakcets? Do you just use the normal house filters from Home Depot?

-Steve

Hey Steve, I had some small SS hanging around. I just bent them into a clip. Then just cliped them on the A/C unit. Has worked for 5-6 years now.
And yes I just got the closest size that would cover the evaporator.

 

[alnav]

Steve, if you write Sea Ray customer service (http://www.searay.com/Page.aspx/pageId/9931/Contact-Sea-Ray.aspx) with your HIN, they likely have a build sheet they will scan and send you. This has models and serial numbers of major equipments that were installed at the factory. Very useful to have around for issues like this and others that will come up.

 

[stevec]

Thanks! That's a great idea...it would be nice to have the a build sheet on file.

-Steve