kaz911
Active Member
Hi Tabman,
i have a little/tiny quality complaint. I am installing an ATC on a friends boat. And the crimp pigtail quality is not very good.
It was not crimped correctly from the factory - so after the first test ride (that did not work) - 2 of 4 cables had jumped out of the "factory crimp". Looking at the cables afterwards - the crimp was mostly done one the plastic/cable insulation part - and hardly any crimp had reached the "connector"
Right now I'm soldering them so should give a bit better "reliability"
best regards
Kasper
i have a little/tiny quality complaint. I am installing an ATC on a friends boat. And the crimp pigtail quality is not very good.
It was not crimped correctly from the factory - so after the first test ride (that did not work) - 2 of 4 cables had jumped out of the "factory crimp". Looking at the cables afterwards - the crimp was mostly done one the plastic/cable insulation part - and hardly any crimp had reached the "connector"
Right now I'm soldering them so should give a bit better "reliability"
best regards
Kasper