95 330 DA Water and holding tank gauges

[sailor723]

I have recently purchased this boat and have a couple of questions about the gauges on the electrical panel for water and holding tanks.

The holding tank gauge just shows "power" in red. Will there be a change in the gauge as the tank is filled or will it just show when it is time to empty? So far the head has probably been flushed 15 times or so and nothing showing on the gauge.

I'm not sure I understand how the water gauge works either. As I've used the tank after being filled "Full" is still illuminated yet 3/4 is not.....recently 1/2 is getting dimmer while 1/4 and "empty" are bright. Do "Full" and "Empty" stay lit all the time?

Sorry if these are dumb questions but the manual is pretty unclear.

 

[Sea Ray Mark]

Can't help you with the water gauge as mine is not working and reads full all of the time. The gauge for the head reads "power" all the time when the power is on, it reads "empty" when I have it pumped out, when I start using it after a few flushes the empty light goes out. The next light that comes on reads "1/2 full" then the next light reads "full do not flush". This is when my wife begins to freak out.

 

[sailor723]

Can't help you with the water gauge as mine is not working and reads full all of the time. The gauge for the head reads "power" all the time when the power is on, it reads "empty" when I have it pumped out, when I start using it after a few flushes the empty light goes out. The next light that comes on reads "1/2 full" then the next light reads "full do not flush". This is when my wife begins to freak out.

Thanks....I'll wait and see if I get a "1/2 Full" reading here in the next while.

 

[frosh coach]

The lower level lights stay on ( 3/4 ful, 1/2). As you use up the fresh water the lights will go off

 

[sailor723]

The lower level lights stay on ( 3/4 ful, 1/2). As you use up the fresh water the lights will go off

So I obviously have issues. Full stays on all the time. 3/4 is never on whether the tank is full or not. 1/2 appears to work as it was on but went out after considerable usage. (1/4 and empty stayed on but the tank never got to empty.) Looks like the first indication I have is when the tank drops below 1/2