86 Sundancer 300da Bench Seats

[JHallahan]

New here, does anyone know where I can find the Helm Bench seat and the Transom bench seat for an '86 300da?

Thanks,

John

 

[88dancer300]

You cannot buy any of this seating. You will have to tear yours apart and rebuild them from scratch if they are that bad.

New here, does anyone know where I can find the Helm Bench seat and the Transom bench seat for an '86 300da?

Thanks,

John

 

[bartlett]

When I had this boat I used captains chairs instead of the back bench. Much more comfortable. I had to get a place that did marine vinyl to rebuild the helm seat.

 

[NJMatt50]

I am just fininshing rebuilding my entire helm seat.. needed to take every piece apart, trace it out cut it with a jig saw, sand down to fit and it still was tough to line all up. After getting all the pieces the correct size I had a counter top guy formica both sides. I tell you this was not an easy job, nor cheap. I did it exactly how the factory did, buying an air stapler to fasten it all together. They matched my color to the tee so mine looks great. I used exterior plywood and fiberglass resined the edges. I would say this would be a $1500 job if you don't do it yourself. Good luck take lots of pics for reference.

 

[JHallahan]

Great swim platform, how did you get your hands on that?

 

[88dancer300]

I built the platform. The stock platform is way too small.

Great swim platform, how did you get your hands on that?

 

[300DA]

I have a 1987 300 DA, and need to change out or get another depth/fish finder that fits the original thru hull, and need to know what is the best but priced cheap for fwd bunk windows, one of mine cracked.

 

[SCORPIO]

If you mean the cabin port hole windows, I got some from searayman13 on eBay.