barneyfife74103
New Member
- Nov 15, 2008
- 1
I've owned the above boat for a few years. It's equipped with a Jabsco Toilet/Macerator Pump...which is plumbed to dump to a thru-hull.
Their are waste and vent fittings plumbed on the starboard gunnel...but the hoses attached to the above, and usinga mirror and some contortion have found that they are about 3' feet long and terminate between the head and aft cabin bulkheads, resting against the "floor" between the bulkheads,
Question: What was the factory location for the holdng tank, which obviously was never installed in my boat? There's a space forward of the engines on the starboard side which seems suitable. I'm just amazed that one was never installed with this setup!
Rod
Their are waste and vent fittings plumbed on the starboard gunnel...but the hoses attached to the above, and usinga mirror and some contortion have found that they are about 3' feet long and terminate between the head and aft cabin bulkheads, resting against the "floor" between the bulkheads,
Question: What was the factory location for the holdng tank, which obviously was never installed in my boat? There's a space forward of the engines on the starboard side which seems suitable. I'm just amazed that one was never installed with this setup!
Rod