Bill Gillespie
Member
Anyone know the diameter of the 50 amp power cord of the 480 DB?
Bill
Bill
50 amp power cord diameter
- Thread starter Bill Gillespie
- Start date
Gofirstclass
Well-Known Member
Bill, if you're not in a hurry to get the info, I'll be back in WA on Sunday and can check on it for you. I don't know if mine is the same diameter but I can let you know what mine is.
You could also call SR Customer Service. Give them your HIN because there were different cords used on different boats.
You could also call SR Customer Service. Give them your HIN because there were different cords used on different boats.
JimG
Well-Known Member
- Nov 4, 2008
- 6,085
- Boat Info
- 2007 310 DA
Kohler 5ECD
- Engines
- Twin 350 Mags
Raw Water Cooled
V-Drives
How close do you have to be? What are you planning?
My 30A is 5/8". I would speculate that a 50A would be 7/8" or so... no more than an inch.
My 30A is 5/8". I would speculate that a 50A would be 7/8" or so... no more than an inch.
Gofirstclass
Well-Known Member
OK, that's quite a bit smaller than mine. I'm guessing mine is 1 1/8" or maybe a little larger. I'll check it Sunday.
KnotEasy
Member
Also, have GW confirm that. Specifically "maybe a little bit larger"
Gofirstclass
Well-Known Member
GW returned to WA on February 9th. I'm headed to WA on 3/8. You can bet there will be some checking of the size of the....well, I guess I don't need to spell it out. :thumbsup:
Of course you are referring to diameter and not length
SR400DB
Active Member
- Mar 18, 2008
- 975
- Boat Info
- 2003 400DB, Simrad NSS12, 6100i, Furuno Navtex, KVH M3 Harbormaster Mark II
- Engines
- Cummins 6 CTA'S 8.3 417 BHP.
I know I've heard somewhere that size doesn't matter?
Rich122
Member
- Aug 7, 2007
- 295
- Boat Info
- '10 540DA, t/t:Amanzi350-40hp
Raymarine G150s HD MFDs/48kw Radar/DSM300 Sounder
- Engines
- Cummins QSC8.3-600s
Pod Drive/Skyhook
21.5kw Onan
My 50amp 125/250 cord is over 1" That 1 1/8" sounds correct
HUMPH
Well-Known Member
- Nov 4, 2009
- 7,618
- Boat Info
- 2003 410DA
2009 Walker Bay 13’
- Engines
- CAT 3126TA's 350HP/
50HP Honda
Bill, I will measure one for you tonight but I would say 1 1/8" to 1 1/4" is right...
JimG
Well-Known Member
- Nov 4, 2008
- 6,085
- Boat Info
- 2007 310 DA
Kohler 5ECD
- Engines
- Twin 350 Mags
Raw Water Cooled
V-Drives
I guess since I have a little boat, I had no idea how big the big ones are... :grin:
- Oct 31, 2009
- 3,455
- Boat Info
- 1992 370 ec
- Engines
- twin cummins 6bta's 300 hp
Rl80 pathfinder radar/chartplotter,SH 2150 matrix vhf w/ais
quicksilver 8
My 50/30/30 amp splitter is huge.
Bill Gillespie
Member
The winning answer is 1 1/4 inch. If this idea is successful I will advise.
Bill
Bill
Gofirstclass
Well-Known Member
I measured my 50A cable this morning. It's 1 1/8".
GW's about to measure my REAL power cable, but that measurement won't be published. :wow:
GW's about to measure my REAL power cable, but that measurement won't be published. :wow:
dpmulvey
Active Member
- Dec 19, 2007
- 4,188
- Boat Info
- 1999/2007 330 Sundancer Hardtop.
- Engines
- 6.2 Merc Horixons
1.5:1 Velvet Drives
After reading the entire thread, to include delusions of grandeur parts, are you sure you sure that is the correct question?
