kellertb
New Member
i have 3 questions: when i have the ac on (just main salon or both), the cooling raw water flow exhaust on the aft hole is strong while the flow from the forward hole is not that strong. is there blockage on the forward hole or is that normal? my raymarine gps was intermittently getting frozen with the raymarine intro page showing. i couldnt reset to get to some charts and i couldnt shut it off so i closed my battery solenoids and shut the gps down. now it wont restart. any ideas? lastly, i chipped about a 5 inch piece of gelcoat off the floor of the anchor locker. i was going to sand, acetone and then marine tex the chip. any other ideas? thanks in advance for any answers.