DukesFin
New Member
- Jul 30, 2009
- 22
- Boat Info
- '05 SeaRay 340 DA Sundancer
- Engines
- 8.1Horizons with V-Drives
Well, I visited the marina yesterday and had a look at the progress... They have begun grinding and let me warn you... If holes in a hull upset you, do not read further!!!
Okay, here are the set of before/during repair pictures as of yesterday. I'll call them "Keel, Lower Chine and Upper Chine":
Keel Damage, then the status of the grinding:
Ground Out:
Lower Chine Damage:
Lower Chine Ground out so far... It's still "wet", but they've got a fan on it to help it dry out:
Upper Chine Damage (I didn't think this one was bad, but as it usually goes with grinding out to be sure, it was worse than expected:
Ground Out:
So, the saga continues... The ground out area is all the way through the hull now, into the foam!
I'll update THIS thread moving forward...
Okay, here are the set of before/during repair pictures as of yesterday. I'll call them "Keel, Lower Chine and Upper Chine":
Keel Damage, then the status of the grinding:
Ground Out:
Lower Chine Damage:
Lower Chine Ground out so far... It's still "wet", but they've got a fan on it to help it dry out:
Upper Chine Damage (I didn't think this one was bad, but as it usually goes with grinding out to be sure, it was worse than expected:
Ground Out:
So, the saga continues... The ground out area is all the way through the hull now, into the foam!
I'll update THIS thread moving forward...