330 Sundancer Sump

[greglwood]

Looking for information on the sump pump in a 98 330DA. I can't find anything about this in the parts manual. I think it might be may by RULE. What I really need to know is GPH, voltage and inlets/outlets.

Greg

 

[Creekwood]

Voltage is easy 12v. GPH in my parts manual is 1500. Not sure the brand of the pumps or the outlet hose size. If you are replacing them, bigger is better. There are 2 by the way. One is mounted higher in the bilge than the other and is called the high water pump. They are automatic and start when the water levels reach a certain level. The light on your bilge pump dash switch should light up if the lower pump is activated and running. If the high water one kicks in there should be an alarm that will sound telling you you have a problem and a lot of water in the bilge. There is no inlet hose on the pumps. The inlet is at the bottom of the pump and is attached to the floor of the bilge.

OOPs, I think you are talking about the shower sump? I will leave the notes above for now. Here is from my manual: