320 Sundancer Aft Cabin Lighting

[DPF]

The master switch (upon entering the cabin) controls all the lights in the cabin. There is a switch near the sink that will turn off the two main lights, but not those right above the aft cabin. If I turn off the master switch, the light in the head won't work. Is there a way to get the lights off in the cabin and still be able to turn on the light in the head?

 

[hack4alivin]

I had the same annoying issue so this is what I did on mine:

Open the face plate the holds the switch for the heads light, the same plate also has a switch for the blower. All you have to do is remove the “power” side of the light switch and splice a jumper from the power side of the blower switch to the terminal on the light switch where you just removed the wire. As long as your DC circuit breaker for the blower is on, that has power all the time. You may need a DC voltage tester to figure out the “hot side” of each of the switches. It took me all of ten minutes to fix this. Works great now.