260 SD Transom locker

[HPH]

The hatch is not closing properly. The latches appear to be ok, but the port latch does not catch when closing. The hatch,when closed, is out of alignment. Anybody got an idea of what to do?

 

[VT260]

pull up both latches while closing. mine does this as well, right side latched and left did not. but lifting both latches while closing seems to do the trick.

 

[HPH]

pull up both latches while closing. mine does this as well, right side latched and left did not. but lifting both latches while closing seems to do the trick.

Thanks! I use to be able to just push it shut, this is a new problem.

 

[DTW]

Had same problem. Just need to tighten the screws of the latch into the boat. May need to add some liguid adhesive as I found on my as the factory did not water proof these screws.

 

[HPH]

Had same problem. Just need to tighten the screws of the latch into the boat. May need to add some liguid adhesive as I found on my as the factory did not water proof these screws.

Thanks!