rpasquarello
Member
- Dec 8, 2010
- 486
- Boat Info
- 2010 240DA,GPSMAP441,Camper Pkg,AC/Heat,Eclipse DSC GX1000S, Ext. Swim Platform, Neutra Salt System
- Engines
- MerCruiser 5.0L MPI ECT w/Bravo 1 sterndrive standard engine (260 hp - 194kW)
Hi Guys,
My 2010 240 Sundancer's tabs are not moving (neither side). I am troubleshooting again tomorrow (prior to the 110+ real feel temps kicking in on Long Island - boat is in Great River, NY) again using YouTube info but would like to know if anyone has part numbers or location to get either new solonoids or a totally new pump just in case?
I have electric and the pump goes on in both directions but I did not jump the wires at the pump for the solonoids yet. Neither tab moves and no visible sheen of fluid in the water. I did note that the pump appears only 1/2 full with fluid (Can that affect them not moving?). Tabs are stuck in level position (thankfully) and have pressure as I cannot freely move them up or down.
I use the tabs all the time and the boat really needs them to get on plane and balance - it is notoriously "tippy" without them.
Help!
My 2010 240 Sundancer's tabs are not moving (neither side). I am troubleshooting again tomorrow (prior to the 110+ real feel temps kicking in on Long Island - boat is in Great River, NY) again using YouTube info but would like to know if anyone has part numbers or location to get either new solonoids or a totally new pump just in case?
I have electric and the pump goes on in both directions but I did not jump the wires at the pump for the solonoids yet. Neither tab moves and no visible sheen of fluid in the water. I did note that the pump appears only 1/2 full with fluid (Can that affect them not moving?). Tabs are stuck in level position (thankfully) and have pressure as I cannot freely move them up or down.
I use the tabs all the time and the boat really needs them to get on plane and balance - it is notoriously "tippy" without them.
Help!
Last edited: