SeaRay
Member
I have a 1999 Searay 210BR. I replaced the steering cable about 3 years ago because it was getting stiff to turn. It has been working fine but the last couple of times out I have noticed that the steering is "sticky".
It is generally smooth and will turn easy but occasionally it will catch and stop on something. If I just quit turning, and maybe slightly go in the opposite direction, it will free it up and turn just fine again. It is way easier to just stop and reverse slightly, than try to force it past the spot where it stops.
It turns with no issues out of the water on the trailer.
Any ideas on where to look for the problem?
Thanks in advance
It is generally smooth and will turn easy but occasionally it will catch and stop on something. If I just quit turning, and maybe slightly go in the opposite direction, it will free it up and turn just fine again. It is way easier to just stop and reverse slightly, than try to force it past the spot where it stops.
It turns with no issues out of the water on the trailer.
Any ideas on where to look for the problem?
Thanks in advance