2011 240 Sundancer Swim Platform Advice?

[ReleaseTheKracken]

I’d like to add a swim platform but I’m not a fan of drilling anything below the waterline. Are there any designs that avoid that?

Does anyone have any advice or recommendations?

Failing that, does anyone know the manufacturer of this one?

 

[techmitch]

I’d like to add a swim platform but I’m not a fan of drilling anything below the waterline. Are there any designs that avoid that?

Does anyone have any advice or recommendations?

Failing that, does anyone know the manufacturer of this one?

https://swimplatforms.com/

 

[ReleaseTheKracken]

https://swimplatforms.com/

Is that who makes this one or just in general? I came across them a few weeks ago but they didn’t seem to have much of a selection. I’ve seen some for other boats that have storage options and stuff.

 

[Lazy Daze]

What Mitch said. By far, they're the best known manufacturers for Sea Ray boats (and others). The owners used to work at Sea Ray building... wait for it... swim platforms!

As far as the one in your picture, you'd have to look for the manufacturer's name somewhere on it.

There's nothing wrong with drilling holes below the waterline as long as it's done right. If you're not comfortable with that yourself you can certainly hire someone to help. Nothing wrong with that, either!

 

[Stee6043]

Is that who makes this one or just in general? I came across them a few weeks ago but they didn’t seem to have much of a selection. I’ve seen some for other boats that have storage options and stuff.

Plenty of us on this site have used swimplatforms.com. They don't have the most impressive website but I suspect that's because of the word-of-mouth advertising they get...everywhere.

As far as I can tell they are just about the only company worth considering if you have a Sea Ray.

 

[ReleaseTheKracken]

What Mitch said. By far, they're the best known manufacturers for Sea Ray boats (and others). The owners used to work at Sea Ray building... wait for it... swim platforms!

As far as the one in your picture, you'd have to look for the manufacturer's name somewhere on it.

There's nothing wrong with drilling holes below the waterline as long as it's done right. If you're not comfortable with that yourself you can certainly hire someone to help. Nothing wrong with that, either!

I’m comfortable doing it myself as long as I know what I’m doing …I’ve just never drilled through a hull and have no idea what’s back there… god wiling, it isn’t wood lol, but I guess it’s better to rip that bandaid off and find out how good I am at it on a 24’ boat than a bigger one lol
I haven’t been able to find a lot of info on how the 240 transom is constructed and it’s been in storage since I bought it a few months ago.

 

[Lazy Daze]

I’m comfortable doing it myself as long as I know what I’m doing …I’ve just never drilled through a hull and have no idea what’s back there… god wiling, it isn’t wood lol, but I guess it’s better to rip that bandaid off and find out how good I am at it on a 24’ boat than a bigger one lol
I haven’t been able to find a lot of info on how the 240 transom is constructed and it’s been in storage since I bought it a few months ago.

There will be wood in the transom. In some places it will be thicker - especially around the drive mounting area. You can pretty much tell by looking on the inside.

But... some will just drill and seal with caulk (don't use 3M5200). Not bad. But a better way is to pre-drill a slightly larger hole than the screw threads, then fill with epoxy. Re-drill for the appropriate sized pilot hole and chamfer the hole a bit. Now the area is completely waterproof. Add a good sealant and you're good to go. Personally I like the Boat Life products, but there's other excellent choices.

 

[Stee6043]

I’m comfortable doing it myself as long as I know what I’m doing …I’ve just never drilled through a hull and have no idea what’s back there… god wiling, it isn’t wood lol, but I guess it’s better to rip that bandaid off and find out how good I am at it on a 24’ boat than a bigger one lol
I haven’t been able to find a lot of info on how the 240 transom is constructed and it’s been in storage since I bought it a few months ago.

I had ideas of DIY install myself...right up until the crate got delivered. I think installation of a swim platform is money well spent on those with the proper equipment and know how (ie. how to keep the boat from sinking ).