2009 210 Select 350 MAG MPI DTS wont start( low engine voltage)

[ironbyron]

Hi Folks! Has any one had this issue? My 2009 210 Select 350 MPI DTS will not start all of a sudden. It's very well maintained and has 225 hours on it. Batteries are fully charged, connections are clean. Smartcraft says low engine voltage and the alarm will not shut off when the ignition on. I'm 7 hours away from the dealership. I would appreciate any input. Could the 90 amp fuse at the starter/solenoid make this problem if blown? Thanks

 

[Nehalennia]

Double check if there is corrosion on your alternator terminals. Look closely inside the insulation on the wiring.

 

[ironbyron]

It was the 50 amp fuse on top of the engine needed resetting. Thanks

 

[jfaisten]

This was helpful
thanks

 

[Steve Craig]

Nothing like an easy fix to start the day.
Read post #2 again & check the wiring again.
"Something" made the breaker trip.
Low voltage could have led to a high amperage draw, causing the breaker to open.