marbelliana
Member
- Oct 19, 2015
- 46
- Boat Info
- 2007 Searay Sundancer 310
Twin Mercs 6.2L V-Drives
"Marbelliana II"
Previous boat: 22' Robalo R227
- Engines
- Twin 6.2L Mercs
Howdy all,
Picked up a 2007 310 DA last season and brought it to Jersey this past April. We stopped in Annapolis on the way up and the young lady who did the pump out may or may not have successfully attached an adaptor (I wasn't watching when she pumped us out).
I pulled up to the pump out station to try and do a pump out myself yesterday and the "screw in" adaptor that screws into the waste reservoir would not screw in...it was too big. Two Marine Max dock guys were on hand and ran up and down the ramp to the service center and tried a couple of them..all too big. So they ended up just using the general hose that has the "skirt" on it that needs to be pressed firmly against the opening in the waste opening on the side of the boat.
Is there a different adaptor that works with the 2007 310 DA? The gents on the dock stated the had a standard size nozzle adaptor that fits all boats. My cap screws in fine so there is nothing stripped or anything like that...
Any thoughts or insights? pushing the hose firmly against the side of the boat seems like a difficult way to do this. Was hoping to get an adaptor that fits so we can attach the hose directly to it.
Thanks! Hope that makes sense!
GG
Picked up a 2007 310 DA last season and brought it to Jersey this past April. We stopped in Annapolis on the way up and the young lady who did the pump out may or may not have successfully attached an adaptor (I wasn't watching when she pumped us out).
I pulled up to the pump out station to try and do a pump out myself yesterday and the "screw in" adaptor that screws into the waste reservoir would not screw in...it was too big. Two Marine Max dock guys were on hand and ran up and down the ramp to the service center and tried a couple of them..all too big. So they ended up just using the general hose that has the "skirt" on it that needs to be pressed firmly against the opening in the waste opening on the side of the boat.
Is there a different adaptor that works with the 2007 310 DA? The gents on the dock stated the had a standard size nozzle adaptor that fits all boats. My cap screws in fine so there is nothing stripped or anything like that...
Any thoughts or insights? pushing the hose firmly against the side of the boat seems like a difficult way to do this. Was hoping to get an adaptor that fits so we can attach the hose directly to it.
Thanks! Hope that makes sense!
GG