Hello all - My name is Ryan, and I'm fairly new to these forums and the boating community (although I've been reading along since last summer).
I purchased a 2007 205 Sport last summer without the wakeboard tower. Last fall, I purchased the wakeboard tower off of a 2005 200 Sport. The Sea Ray parts manuals available from Sea Ray's website show that they are one in the same (the part # is still on the tower, too!). Xtreme Towers has told me that Sea Ray ordered the same tower from 2005-2007, and switched to the "205 Sport" tower in 2008. I'm fairly confident it's the same tower..Sea Ray will admit that my boat has the reinforced fiberglass, although they won't admit that the tower will fit.
The dealers close to me are willing to install the tower, but I need to come up with new hardware. Xtreme will not sell directly, and I've gotten the run-around at the Marine Max closest to me. Stainless steel nuts and bolts should be easy enough to come by, but what about those rubber gaskets?
Thought I would post to see if anyone has had a similar experience or advice. I've searched and read and searched again on these forums for anything related to the subject of wakeboard towers.
I'm in the Conroe, TX area.
Thanks!!
Ryan
I purchased a 2007 205 Sport last summer without the wakeboard tower. Last fall, I purchased the wakeboard tower off of a 2005 200 Sport. The Sea Ray parts manuals available from Sea Ray's website show that they are one in the same (the part # is still on the tower, too!). Xtreme Towers has told me that Sea Ray ordered the same tower from 2005-2007, and switched to the "205 Sport" tower in 2008. I'm fairly confident it's the same tower..Sea Ray will admit that my boat has the reinforced fiberglass, although they won't admit that the tower will fit.
The dealers close to me are willing to install the tower, but I need to come up with new hardware. Xtreme will not sell directly, and I've gotten the run-around at the Marine Max closest to me. Stainless steel nuts and bolts should be easy enough to come by, but what about those rubber gaskets?
Thought I would post to see if anyone has had a similar experience or advice. I've searched and read and searched again on these forums for anything related to the subject of wakeboard towers.
I'm in the Conroe, TX area.
Thanks!!
Ryan