2006 vintage Cablemaster remote control

[ttmott]

It appears Glendinning no longer has the remote transmitters available for the vintage system on my boat.
Mine has gone missing.
Any ideas on how to acquire a replacement remote control?

Thanks
Tom

 

[PartnerShip]

It appears Glendinning no longer has the remote transmitters available for the vintage system on my boat.
Mine has gone missing.
Any ideas on how to acquire a replacement remote control?

Thanks
Tom

I own a commercial shrimp boat. I have had great success with these running the electric winches.

https://www.amazon.com/gp/product/B081YRZ1QG/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

 

[PlayDate]

It appears Glendinning no longer has the remote transmitters available for the vintage system on my boat.
Mine has gone missing.
Any ideas on how to acquire a replacement remote control?

Thanks
Tom

Tom,

Is this what you are looking for?

 

[ttmott]

Tom,

Is this what you are looking for?

View attachment 160223

Yes but only the fob. The system has the receiver and is set up for remote operation, it's the remote fob that I need. I bought a new fob which will not connect to the receiver following the instructions; it is apparently for the newer systems - it seems they changed the frequency of the system at some point.

 

[PlayDate]

Yes but only the fob. The system has the receiver and is set up for remote operation, it's the remote fob that I need. I bought a new fob which will not connect to the receiver following the instructions; it is apparently for the newer systems - it seems they changed the frequency of the system at some point.

Or .....the control box has gone bad on the RF side.

 

[ttmott]

Or .....the control box has gone bad on the RF side.

Possibly, but I can put into programming mode and all of the right lights in it are illuminated. But, I'm pretty sure I got the wrong remote. It just won't recognize the remote linking.

 

[The Bill Collector]

I own a commercial shrimp boat. I have had great success with these running the electric winches.

https://www.amazon.com/gp/product/B081YRZ1QG/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

I bought this same remote for my Glendinning, but have yet to install it...

 

[ocgrant]

Tom, try programming an old 2 button garage door remote if you have one around. Should be a 315mhz I am guessing. I have mine still I can pop it apart and see what freq it is but I am guess 315 so see if your receiver can read something to test it. If it works then just get a 2 button 315hz remote off Amazon and program it