jerryd5515
Member
- Aug 16, 2009
- 173
- Boat Info
- 2002 SR 360 Sundancer
- Engines
- Twin MerCruiser 8.1 S Horizons w/ V-drives
I have a 2006 290 Sundancer with a rusted A/C pan. I received a SS pan from Cruisair and was ready to install it this weekend, but I cannot get the panel removed above the A/C unit. The v-berth bed/couch consists of three cushions and I have removed two of them, but the 3rd cushion is attach to the panel above the A/C unit. Half that panel is carpeted and half is the 3rd cushion. The carpeted area has 6 screws exposed, that I have removed. I can lift this panel slightly, but something is holding down the panel where the cushion is attached. I can find no other screws that are holding down this section of the panel and it does not move as if it were attached by sliding under a clip at the edge. I talked to the service guys at our local dealership and they were no help. Does anyone know how to remove this panel?