scottkel
New Member
Okay - to start, I am new to the site. Joined a long time ago but havent been here in a long time and just started coming back and looking around...
Regarding my question / problem - I have a 2006 195 Sport with Wake package and my boat has these "peices" on both sides, above the graphic that are obviosly somesort of after thought of Sea Rays. Within a year of buying the boat new, one of these was cracked and one was loose. These came from the factory with a less than appealing "silicone" job and once the first one broke, I attempted numerous times to get it covered under warranty either by my dealer or by Sea Ray. I was turned down each time... I have dealt with the issue the last few years...
After seeing that from 2007-current models have the same "indention" on the sides of the boat (they now have a matching graphic there), I know for certain that Sea Ray knew it was a problem becuase my year was the last year the "cover" was put on. I have tried to get my dealer to cover the costs of removing the less than acceptable "cracked and broken" covers but they said that they will charge me to do so. This infuriates me because it was OBVIOUSLY A KNOWN ISSUE IF SEA RAY DID NOT CONTINUE TO INSTALL THESE...
I finally got to a point that I was going to remove them myself and removed the port side (left side) and there is just white silicone on the bottom and some sort of brown epoxy or something across the entire top edge. Now it just looks like crap... All from an issue that Sea Ray knows about but will not correct.
Has anyone else had issues with this "cover panel" or have any advise?
Thanks so much!
Scott
Regarding my question / problem - I have a 2006 195 Sport with Wake package and my boat has these "peices" on both sides, above the graphic that are obviosly somesort of after thought of Sea Rays. Within a year of buying the boat new, one of these was cracked and one was loose. These came from the factory with a less than appealing "silicone" job and once the first one broke, I attempted numerous times to get it covered under warranty either by my dealer or by Sea Ray. I was turned down each time... I have dealt with the issue the last few years...
After seeing that from 2007-current models have the same "indention" on the sides of the boat (they now have a matching graphic there), I know for certain that Sea Ray knew it was a problem becuase my year was the last year the "cover" was put on. I have tried to get my dealer to cover the costs of removing the less than acceptable "cracked and broken" covers but they said that they will charge me to do so. This infuriates me because it was OBVIOUSLY A KNOWN ISSUE IF SEA RAY DID NOT CONTINUE TO INSTALL THESE...
I finally got to a point that I was going to remove them myself and removed the port side (left side) and there is just white silicone on the bottom and some sort of brown epoxy or something across the entire top edge. Now it just looks like crap... All from an issue that Sea Ray knows about but will not correct.
Has anyone else had issues with this "cover panel" or have any advise?
Thanks so much!
Scott