2005 32 sundancer V berth cushion removal

[Bob 32]

I am trying to remove the front V berth cushions that are mounted on the two sides and front of the boat. Does anyone know how they come off?
Thank you
Bob32

 

[Shenanigans77]

I am trying to remove the front V berth cushions that are mounted on the two sides and front of the boat. Does anyone know how they come off?
Thank you
Bob32

The side bolsters are secured with screws that go through the bottom of the cabinets, two brackets each side. The lower corners closest to the foot of the bed are screwed down through a small split in the cushion. Front bolster is attached with the same metal brackets you will see once the side bolsters come off. Redid mine last winter to make the bed bigger. Those factory bolsters are HUGE

 

[Shenanigans77]

I am trying to remove the front V berth cushions that are mounted on the two sides and front of the boat. Does anyone know how they come off?
Thank you
Bob32

Welcome! Lots of good 320 reading here

http://clubsearay.com/index.php?threads/official-320-dancer-thread.1313/

 

[Bob 32]

The side bolsters are secured with screws that go through the bottom of the cabinets, two brackets each side. The lower corners closest to the foot of the bed are screwed down through a small split in the cushion. Front bolster is attached with the same metal brackets you will see once the side bolsters come off. Redid mine last winter to make the bed bigger. Those factory bolsters are HUGE
View attachment 129957
View attachment 129958

Thank you very much I will give it another try this weekend. I was going to just try and take them off and leave them off but not really sure what is behind them.

 

[Shenanigans77]

Thank you very much I will give it another try this weekend. I was going to just try and take them off and leave them off but not really sure what is behind them.

Its all unfinished under the bolsters and the vinyl doesnt extend far enough up or aft on the hullsides. This was after i removed the old foam and vinyl off the hull

 

[Bob 32]

well so much for leaving them off. I will have to see if I can have someone make something smaller to fit. Thanks for the help