Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I am trying to remove the front V berth cushions that are mounted on the two sides and front of the boat. Does anyone know how they come off?
Thank you
Bob32
Welcome! Lots of good 320 reading hereI am trying to remove the front V berth cushions that are mounted on the two sides and front of the boat. Does anyone know how they come off?
Thank you
Bob32
Thank you very much I will give it another try this weekend. I was going to just try and take them off and leave them off but not really sure what is behind them.The side bolsters are secured with screws that go through the bottom of the cabinets, two brackets each side. The lower corners closest to the foot of the bed are screwed down through a small split in the cushion. Front bolster is attached with the same metal brackets you will see once the side bolsters come off. Redid mine last winter to make the bed bigger. Those factory bolsters are HUGE
View attachment 129957
View attachment 129958
Its all unfinished under the bolsters and the vinyl doesnt extend far enough up or aft on the hullsides. This was after i removed the old foam and vinyl off the hullThank you very much I will give it another try this weekend. I was going to just try and take them off and leave them off but not really sure what is behind them.