2003 380DA Module for Systems Monitor Location

[Bill Hood]

Does anyone know where the module is for the systems monitor on a 2003 380 Sundancer? Sea Ray said in the engine room/bilge but am unable to locate. Thinking it could be in with the water heater behind the aft stateroom panel? Thanks,

 

[JimG]

I'm sure someone will chime in to help... there are several 380 owners here.

Some reading for you:
http://www.clubsearay.com/index.php?threads/official-380-thread.12200/

Best of luck and welcome to CSR!

 

[superwa]

In my 01 it’s under the helm forward of all the fuses and such and toward midship.

 

[Bill Hood]

In my 01 it’s under the helm forward of all the fuses and such and toward midship.

Many thanks! After hunting more in the bilge area, there are two large black covers, one for the breaker panel and one come to find out covers the module and several solenoids. I took a new coax cable and went directly from the module to the system monitor at the helm and no change. In addition, I checked the orange wire to the buzzer and it had a constant 6-7 volts. From my reading, it appears the systems monitor at the helm is defective so have ordered from my Sea Ray dealership. Unfortunately they could not guarantee this is the issue but from all my research, it should be. BOAT = Break Out Another Thousand....but, we're loving it.

 

[superwa]

What issue are you having?

 

[dtfeld]

Tom..Ttmott used a Maretron RIM module and a DSM410 to replace that module...did a nice write up. Plus the DSM410 can be used for a lot more than systems monitor.