2002 Searay 220 Sundeck parts

[Ackdog]

Hi All,

The project 2002 SeaRay 220 Sundeck that I am working on needs replacement parts that I cannot seem to find. I also do not know if it has the 5.0 or 6.7 engine as the plastic shroud is missing and if there is a model number somewhere on the engine I can find. Here is a short list or parts that I am hunting for:

Cushions
Dashboard parts (bezel around gauges and top vinyl cover) as it was left out to the weather for several years.
Lenses for bow navigation lights

Does anyone have any suggestions where I can get these items? I have tried Boat Outfitters and Great Lakes Skipper with no luck.

Thanks, Ron

 

[ColoSR]

Not sure on the 2002, but my 2003 Sundeck had Attwood 3800 series nav lights. I replaced them about 2 years ago because the previous owner melted the lenses. I am planning to replace them with the new Attwood 3500 series 2 mile LED's. Will let you know if I can get them out undamaged.

 

[CNYBoater]

Not sure if it is the same for mercruiser, but mercury outboards have stamped numbers on a freeze plug you can look up here.

https://webapps.brunswick.com/literature/literatureSearch.do

 

[ColoSR]

You can get the original engine serial number from the Sea ray website using your HIN number. The tag is affixed to the block by the starter, real pain to get a look at.

 

[Ackdog]

Not sure on the 2002, but my 2003 Sundeck had Attwood 3800 series nav lights. I replaced them about 2 years ago because the previous owner melted the lenses. I am planning to replace them with the new Attwood 3500 series 2 mile LED's. Will let you know if I can get them out undamaged.

Thanks, please pass along with how the installation went.

 

[Ackdog]

Not sure if it is the same for mercruiser, but mercury outboards have stamped numbers on a freeze plug you can look up here.

https://webapps.brunswick.com/literature/literatureSearch.do

I will take a look, thanks.

 

[Ackdog]

You can get the original engine serial number from the Sea ray website using your HIN number. The tag is affixed to the block by the starter, real pain to get a look at.

I will squeeze my big head in there and take a look, thanks!

 

[ColoSR]

It might be easier to get your phone in there and take a picture. the freshwater tank makes it hard to get a straight look at it.

https://www.perfprotech.com/blog/ar...es: The serial number,on the UPPER SWIVEL PIN.

 

[Ackdog]

Thanks awesome, thanks! I'm sure I'll be able to squeeze a camera in there to take a picture.