Kat
New Member
We are looking at a 2002 280 Sundancer that needs a complete exhaust. What are we looking at in parts? Is it just risers, manifolds and gaskets? It has a twin 4.3 Merc with Alpha drive. Is it a difficult job?
2002 280 Sundancer Needs Complete Exhaust
- Thread starter Kat
- Start date
dpmulvey
Active Member
- Dec 19, 2007
- 4,188
- Boat Info
- 1999/2007 330 Sundancer Hardtop.
- Engines
- 6.2 Merc Horixons
1.5:1 Velvet Drives
Easy and expensive. Figure north of $2K per engine DIY manifolds to Y pipe. Easier to remove the engines.
Bucit
New Member
- Mar 12, 2010
- 3,144
- Boat Info
- 2005 280 Sundancer
2004 SPD-104 Achilles w/ 8hp Yamaha
- Engines
- Twin 4.3 MPI's with Alpha drives.
You have the old "wet" exhaust system. OEM will be more than aftermarket but you get what you pay for. I have the same setup and motors DO NOT need to be removed to do this. Marine Max wanted $5300+ to do mine. I have the dry joint exhaust and OEM parts were around $3500 total for both motors. Yours will be much cheaper. If your handy it shouldn't take but 4-8 hours do to everything.
