1999 310 Sundancer Raydata Replacement Options

[Seamonster]

My Raydata screen has died. Just wondering about best replacement options. Currently have retractable transducers. So. Looking at the i50 Tridata, but can't determine if a retractable transducer is available. Anyone have experience upgrading the Raydata?

 

[dtfeld]

What is the actual display model number?

Most Sea Ray of that era had an ST600 ST (speed and temp transducer) with a separate D600 depth transducer (retractable). Mine were hardwired back to an ST60 tridata. If this is your setup, the i50 is a drop in replacement as I recall.

You can also replace the LCD screen for about $150. —> https://www.ebay.com/itm/114848887802?hash=item1abd86f3fa:g:YlIAAOSwUm5f6fmS

it’s a very easy DIY job.

 

[dtfeld]

I did the screen replacement on my Autopilot head here. -->http://clubsearay.com/index.php?thr...eries-autopilot-st7001-lcd-replacement.96146/

I might attempt to repair my ST60 since I found the new screen. Right now its just tucked up behind my dash acting as a SeaTalk1 to SeaTalkNG converter for speed, temp and depth. I was hoping they would come out with a tridata that matches the Axiom line, but not so far.

 

[Seamonster]

What is the actual display model number?

Most Sea Ray of that era had an ST600 ST (speed and temp transducer) with a separate D600 depth transducer (retractable). Mine were hardwired back to an ST60 tridata. If this is your setup, the i50 is a drop in replacement as I recall.

You can also replace the LCD screen for about $150. —> https://www.ebay.com/itm/114848887802?hash=item1abd86f3fa:g:YlIAAOSwUm5f6fmS

it’s a very easy DIY job.

Don't have ST60, but have been told it is a drop in for the Raydata. Would like to upgrade to i50 and wondering if current transducers will work. The transducer part number is M78718 based on Raydata manual.

 

[Seamonster]

What is the actual display model number?

Most Sea Ray of that era had an ST600 ST (speed and temp transducer) with a separate D600 depth transducer (retractable). Mine were hardwired back to an ST60 tridata. If this is your setup, the i50 is a drop in replacement as I recall.

You can also replace the LCD screen for about $150. —> https://www.ebay.com/itm/114848887802?hash=item1abd86f3fa:g:YlIAAOSwUm5f6fmS

it’s a very easy DIY job.

What is the actual display model number?

Most Sea Ray of that era had an ST600 ST (speed and temp transducer) with a separate D600 depth transducer (retractable). Mine were hardwired back to an ST60 tridata. If this is your setup, the i50 is a drop in replacement as I recall.

You can also replace the LCD screen for about $150. —> https://www.ebay.com/itm/114848887802?hash=item1abd86f3fa:g:YlIAAOSwUm5f6fmS

it’s a very easy DIY job.

Link says no longer available and is for the ST60, not the Raydata, but thanks!

 

[dtfeld]

Link says no longer available and is for the ST60, not the Raydata, but thanks!

Each model has a specific LCD screen, so you need to search for the specific model you have. You might try gaugesaver.com to see if he can repair it.

 

[Seamonster]

Each model has a specific LCD screen, so you need to search for the specific model you have. You might try gaugesaver.com to see if he can repair it.[/QUOT

Each model has a specific LCD screen, so you need to search for the specific model you have. You might try gaugesaver.com to see if he can repair it.

So is Raydata not the model? That is all I see on it and in the manual.