1993 40' Express Alarm Issue

[Bill Mero]

Hi All
I have a bad alarm circuit board at my helm. All the alarm lights come on as they should but the alarm does not sound. I have tested the alarm and it is good. I have also checked the voltage on the power wire to the alarm when I set off a dummy alarm and it is not getting 12 volts when an alarm goes off. Does anyone know where I can get a used or new circuit board?

 

[Skybolt]

Working Led Sys Monitor

I upgraded my sys monitor a few years ago to digital. This was working when it was removed. I had to replace two of the led's but everything works as is. The original owner had it connected to a terminal block and not the PCB. I don't have the ribbon connector PCB, so it's what you see here with...

clubsearay.com

 

[Bill Mero]

Thanks for your reply. I have not found where the ribbon goes. Looks like I need to do that to see if 5' is enough length. Would like to find one with the ribbon connector still attached.