Old Blue
New Member
- May 1, 2012
- 46
- Boat Info
- I am restoring my boat that I picked up last year its a 1987 Sea Ray cuddy cabin 230
- Engines
- 350 Chevy Mercury out drive
Well just thought I would share some of the pictures I just took after a years work on my boat. I just finished installing my pulpit which has a 700 pro fish windless with 125 ft. rode and 10ft chain 18 lb danforth anchor (will power spray anchor later not sure what color yet). Most of the teak I replaced and sanded and refinished. On the teak I used natural Cetol (product of Sikkens) as I applied 3 coates natural and 4 coates high gloss, went 4 and 4 on the pulpit. Had the side pannels re-upholstered and I used a hard board 1/2 which I trimmed in teak. I still have quite a way to go still as I am working on my cabin doors, as I am going to refinish the teak and give her a paint job (not sure what paint to get). One thing about teak I found out is that if you sand it down good you cant tell the difference between the new and the old, just have to make sure you get all the oils out of the old teak. I want to thank everyone for giving me some good tips on helping me through this process. Now its time to catch some steelhead.
Thanks again.
Thanks again.
Attachments
-
100_1761.jpg99.8 KB · Views: 248
-
100_1762.jpg101.2 KB · Views: 226
-
100_1763.jpg96.5 KB · Views: 237
-
100_1765.jpg93.2 KB · Views: 219
-
100_1766.jpg94.7 KB · Views: 235
-
100_1767.jpg89.8 KB · Views: 245
-
100_1768.jpg91.8 KB · Views: 247
-
100_1769.jpg91.9 KB · Views: 226
-
100_1770.jpg94.5 KB · Views: 239
-
100_1771.jpg93.7 KB · Views: 232
-
100_1772.jpg86.2 KB · Views: 221
-
100_1773.jpg93.1 KB · Views: 231
-
100_1775.jpg93 KB · Views: 225
-
100_1776.jpg96 KB · Views: 218
-
100_1774.jpg85 KB · Views: 220