captainclam53090
New Member
- Dec 5, 2010
- 1
- Boat Info
- 1985 Sea Ray 300 Sedan Bridge
Raymarine RC435I
Raymarine DS600X
Raymarine ST6001
Humminbird 38
- Engines
- Twin 350 Mercruisers
I am considering adding a Humminbird HDR610P in dash depth sounder with an in hull transducer to my boat ----- I am told that the hull should most likely be no thicker than 1/2 inch in order for the depth sounder to work on my boat......
Does anyone know what the actual hull thickness is on my particular boat model and whether the Humminbird transducer will work......?
A few footnotes ---- I have twin V drives and the transom mounted transducer wont really work due to the turbulance and the small mounting area right between the tunnels.....Also, I have an Ensign depth sounder with a through hull transducer on the boat now but it doesnt work beyond 200 FOW, and I will be traveling out to 400 FOW more often this next season.....
Thanks in advance for the help!
Does anyone know what the actual hull thickness is on my particular boat model and whether the Humminbird transducer will work......?
A few footnotes ---- I have twin V drives and the transom mounted transducer wont really work due to the turbulance and the small mounting area right between the tunnels.....Also, I have an Ensign depth sounder with a through hull transducer on the boat now but it doesnt work beyond 200 FOW, and I will be traveling out to 400 FOW more often this next season.....
Thanks in advance for the help!