1983 Sea Ray V260...(WEEKENDER ? )

[CRACKERJACK]

Just got this boat a few weeks back and I am trying to figure out the rear seat setup...there is nothing there to go by. Cant seem to find any pics of what it should look like. The person I bought it from has taken all of the decals and graphics off of the boat so I do not really know what it looked like in its original state. Also I have the frame work for rhe canvas covers but would like to have the complete camper package for this craft. My funds are limited and don't know if any of you fellow members ( I am new ) can steer me in the right direction. If you have any pics PLEASE saend them to my e-mail..thanks:huh:

 

[GrandMaster]

Whats the HIN?

 

[CRACKERJACK]

whats the hin?

ser85m820882-260.....eoo 4-83

 

[jobofly]

i have a 230 weekender, what exactly are you looking for?

 

[GrandMaster]

Hmmm, doesnt look like there was a "Weekender" in '83 or '84:

http://www.searay.com/boat_graphics/electronic_brochure/company1729/1C1_27_74DERNJFE439.pdf

http://www.searay.com/boat_graphics/electronic_brochure/company1729/1C1_27_74DERNJFT442.pdf

 

[CRACKERJACK]

hmmm, doesnt look like there was a "weekender" in '83 or '84:

http://www.searay.com/boat_graphics/electronic_brochure/company1729/1c1_27_74dernjfe439.pdf

http://www.searay.com/boat_graphics/electronic_brochure/company1729/1c1_27_74dernjft442.pdf

thanks for the info...from what i can tell i have a express cruiser....i appreciate the help !!

 

[CRACKERJACK]

i have a 230 weekender, what exactly are you looking for?

was looking to see the setup for the rear seat height width etc....but from the pics i got from grand master i did'nt see one....thanks for the come back

 

[just mike]

I've got a 260, which back seat are you looking for? You have the drop down seats on the back of the helm seat and then you have the back bench on the transom.

 

[CRACKERJACK]

I've got a 260, which back seat are you looking for? You have the drop down seats on the back of the helm seat and then you have the back bench on the transom.

the back bench seat on the transom, there is nothing there to go by

 

[just mike]

Unfortunatly I don't know how to get pictures from my phone to this board. A description is about all I can do. The seat portion is attached with a piano hinge to the transom. It is supported by two fold down legs. and the seat is constructed with 1/2 inch plywood with about a three inch foam cushion covered with vinyl. Side to side runs from the side of a the boat to about a 1/2 inch from the door in the transom, front to back is about 18 to 24 in. The back cushion is the same length and 6 to 8 in. top to bottom and hangs off of a piece of teak mounted on the transom.
I hope this helps.

 

[CRACKERJACK]

Thanks Mike, that explains the teak that runs across the back. It has a groove in it where I thought the backrest of the seat would hang.....the rest of it I can fab my self....I will be sure to post some Pics when I'm done....thanks again..Jack

 

[manny4608]

Mike described it perfectly, but here is a pic of the backrest and bench that I removed off mine when I had them redone.

 

[CRACKERJACK]

Thanks Manny.....I should be able to figure something out...goin salvage huntin tomorrow at an old boat yard ! Maybe I can get lucky.