1980 270 Sedan Bridge Rehab Begins

[lee@simmtechs.com]

Well we will start with a lot of before pics. And any adivce you care to share. Anybody know what those two metal brackets are for beside the helm in the first pic?:smt021
Working on getting photos. Photobucket to large so says system. Help?

 

[Big Island Lifer]

deleted

 

[lee@simmtechs.com]

water supply under Vberth

 

[lee@simmtechs.com]

After removing cabinets I thinks this is orginal Vberth. Somebody cut the nose?

 

[Big Island Lifer]

Well we will start with a lot of before pics. And any adivce you care to share. Anybody know what those two metal brackets are for beside the helm in the first pic?:smt021
Working on getting photos. Photobucket to large so says system. Help?

The two brackets probably held a step/ foot rest.

You can use the photo editing out of microsoft office picture manager to resize your pics.

 

[lee@simmtechs.com]

The two brackets probably held a step/ foot rest.

You can use the photo editing out of microsoft office picture manager to resize your pics.

Thanks found the resizer from microsoft in another thread

 

[lee@simmtechs.com]

more before pics

 

[lee@simmtechs.com]

Anybody know were you might be able to get that rear curved Plexiglas

 

[GoofyLeo3]

Nope, but I answered you query about lighting in the other thread. If you are gonna upgrade all you interior lighting to LED, I heartily recomend the lights I'm using ($20/pair); or go to a big truck-stop and see what they have there.

 

[lee@simmtechs.com]

Nope, but I answered you query about lighting in the other thread. If you are gonna upgrade all you interior lighting to LED, I heartily recomend the lights I'm using ($20/pair); or go to a big truck-stop and see what they have there.

Was looking for them the other night. Are they in trailering or where.

 

[lee@simmtechs.com]

Anybody know where you can get a wiring diagram of the helm for Sear Ray boats?

 

[AKBASSKING]

PM me with your email address and i can send you the wiring schematics for my 86 300DB. Should be pretty much the same.

take a look at this:

http://clubsearay.com/forum/showthread.php?t=27282

 

[lee@simmtechs.com]

PM me with your email address and i can send you the wiring schematics for my 86 300DB. Should be pretty much the same.

take a look at this:

http://clubsearay.com/forum/showthread.php?t=27282

Wow what a job. I Have not even gone top side yet.
Thanks will do.

 

[lee@simmtechs.com]

Wow what a job. I Have not even gone top side yet.
Thanks will do.

How do you post that thread link like in your last post

 

[AKBASSKING]

I went to the thread copied the address bar and then pasted it to the thread.

 

[GoofyLeo3]

Was looking for them the other night. Are they in trailering or where.

In automotive under 'LED driving lights'. I'm not sure how well they would work as aux driving lights on a car, but I sure do luv 'em for boat apps!:smt001 So far I've bought 6 boxes.
Get 'em at Advance Auto Parts; $19.99/pair; stock#6250369.

 

[lee@simmtechs.com]

Wow taken a week to get the starter out after it not being asble to turn motor over. In the process had to loosen the hose coming from the outdrive. And in the middle of this hose is what you see in this pic. Anybody know why the two small hoses which appear to run from power steering pump run into this metal tube?:huh:

 

[Dasch Boat]

Anybody know why the two small hoses which appear to run from power steering pump run into this metal tube?:huh:[/quote]

Looks like a heat exchanger to cool the PS fluid.

 

[BlewByYou88]

 

[Paladin]

hi, This is great to see. I have an 81 srv255. I wonder what is this grid made of? I can't tell if it's wood with fiberglass or ? This is going to be a great project! Paladin