1966 or 1967

[Jwiggins]

I'm not sure on the year of my SRV 170. The research that I have found shows two years of the SRV models where built. The original seating is Drivers seat, passanger back to back and one seat on either sides of the motor. It has a inboard 4 cylinder mercruser.

 

[Chris Nowell]

Welcome aboard. Someone will know sumthing, eventually. Hang in there. Pics are helpful:grin:

 

[dvx216]

looking at the archives the 66 had single seat on drivers side 67 had back to backs on both sides but that is with standard seats looks like option could go either way

 

[JimG]

Get the HIN off of the right rear corner... the last two digits will be the year.
http://clubsearay.com/showthread.php/38327-Hull-Number?highlight=SERT

Welcome to CSR!

 

[74HardTop]

I think Sea Rays didn't have embossed HINs on the stern until '73 or so. There would be a plate near the helm if it's not gone. My '70 Pachanga had a plate.

 

[moparlvr4406]

could be a number on a tag inside the gunnel near the transom also
My 66 is on the stb side aft