04 smartcraft thru hull depth/water temp sensor

SAshton said:
I am using petit hydrocoat on bottom. Should I paint new transducer when I get one?
Click to expand...

Yes, but not with hull bottom paint. There is actually a specially formulated transducer anti fouling that won't interfere with the sonar beam.

It comes in 3-4 oz small bottle. I got it from my electronics installer. You might be able to get it from BOE.

Henry


Sent from my iPad using Tapatalk HD
 
bankyf said:
Mine didn't work on Systemview. It was hard to swallow $300 for water temp. I called Airmar and got some details on which wires to test from the transducer and expected ohm readings. Everything tested out perfect. I checked all settings in system view and everything seemed correct. When I purchased my vesselview 7, I gave in and purchased a new transducer. I decided to try the vesselview 7 before swapping out the transducer and my temp now works perfect. Unfortunately, I opened the bag for the new transducer and was unable to return it. The one I have is depth speed and temp all in one. It will work with what you have, and I could make you a pretty good deal on it, but it may be slightly less straightforward than the simple swap of the correct unit.
Click to expand...
Still have this?
 
dirvan said:
Is it mercury part number 888828 or 8M0075630?
Click to expand...
Unfortunately, no. It is an 8m6001946. And now that I look, I believe I mis-spoke before. It looks like this is speed and temp. Depth was a separate transducer.
 
bankyf said:
Unfortunately, no. It is an 8m6001946. And now that I look, I believe I mis-spoke before. It looks like this is speed and temp. Depth was a separate transducer.
Click to expand...
ok, Thank you
 
You must log in or register to reply here.

Forum statistics

Threads
113,188
Messages
1,428,233
Members
61,099
Latest member
Lorenzo512
Back
Top