window

My front starboard windshield was destroyed when a sailboat fell over on it while on the hard. Any recommendation on locating a replacement? Thanks!

I wanted to reach out to see if anyone has considered adding ventilation to the salon of a DB52. A little background - during the week when we are not on the boat we usually do not leave the AC on and the temperatures in the salon can get well above 100 degrees. As the temperature increases...

Looking for replacement portholes. The off set rectangle porthole. I really need all 6 of them. 3 Port and 3 starboard. I'm getting ready to paint the hull and thats the last parts I need. Of course I have not found anywhere. PLEASE HELP! David Kelley

Hello guys, I am looking for a side galley window, kitchen cabinet, counter top and a few other things. My boat is Sedan Bridge 360, year 2007 and unfortunately Sea Ray or Marinemax distributors don't have any of these for boats older than 10 years. Any idea where can I find those parts...

Gday from Australia Have a problem. After 2 months of scorching fires here, we are now flooding (incl my boat, well not really) I am getting a leak coming from the window in the lower cabin, main one above the kitchen. There is 3 swing locks on the window and the bottom ones seem to be rusted...

I have a 1986 Sedan Bridge 300 with a shattered sliding glass window in the main cabin. It is located in the Chicagoland area. I am hoping to have someone replace/install the glass. 1. Does anyone know who could help? I have called all around with nobody able to do it. 2. Does anyone know...

I have a 1986 Sea Ray Sedan Bridge 300. My friend slid the glass window in the cabin closed too hard and it shattered. It is a trapezoid shaped window. It seemed to be made of auto glass judging by the way it shattered. Does anyone know where I can get a replacement? I called Safelite and...

Ocean Dynamics has been in the business for over 20 years specializing in the manufacturing, repairing and/ or refurbishing of marine windows, windshields, curved/ bent glass, doors and acrylic work. We also sell marine vinyl gaskets, accessories, and extrusions. We serve customers all around...

Looking for a port side cabin window for a 1980's 270 Sundancer.

I know this has been addressed but I cannot find any detailed description on what it takes to re-bed the long windows on a 390 EC. I know I pull the rubber that hides the screws and take out the screws. Does that whole window come out as one piece? Is there an issue with the aluminium buckling...

I have discover that one of the two deck skylights on our 290 Sundancer is loose. Does have anyone have experience with this problem? We discovered after a hard rain that it was leaking (Friday's storm up the east coast). Today, trying to explore the problem and see if I can just remove the...

Hello. So now that I am starting to get into the boat that I just got, I am noticing that the window frames, which appear to be aluminum, are very oxidized/pitted?? (I assume from being out on the water and not protected). I'm wondering if anyone knows what I can do to restore the appearance...

I need some help (or at least encouragement) on removing and rebedding the port sliding window on my 1989 280 Sundancer. As you can see from the photo, every time it rains, the padding just to the back of the window gets soaked. Last season, I did notice water was starting to sit inside the...