stainless

There is a strong magnet (work base) in my garage that I run hardware by before installing. Hardware which is attracted is vetoed as it will rust and stain. This will be bad for the future owner who may be me. My winter project is a used outboard boat that has seen saltwater. The prior...

I have a 2000 510DA and I’m trying to swap out my acrylic grab bars/towel bars inside the cabin with stainless grab bars/towel bars found in 2001-2003 510’s. I’ve been completely unsuccessful with the normal go to sites. I’ve tried to google the part number/description given in the 2001 510...

I managed to smash my rear swim ladder on the dock... it's a "High-Seas" model and fits really well... ive done a fair bit of the google and i cant seem to even find a manufacturer of this... my boat is a 1991 350 Sundancer. If anyone can point me in a good direction that would be great.

Just some trivia. Whenever two dissimilar metal components of your boat are in saltwater, corrosion will damage the one that is located lower on the following list from Wikipedia: "Galvanic series (most noble at top) The following is the galvanic series for stagnant seawater. Graphite...

Duplicate of original posted earlier.

Like everyone here, I have to encounter the issue of replacement of the manifold and risers. Yet, I am at a loss to determine if the after market stainless is worth it? http://www.hitekmarine.com.au/products.htm seems to make great claims. What I want to know for those who are in a salt water...

:grin:Hello All, I Came up with this idea about 4 years ago and thought i'd share my little project. I boat in Lake erie and with the winds the water level where i am at can change 3 feet or more and i hated leaving my boat loose to smack the dock while i was gone so i came up with these...

Hi all: I posted a message a few days ago offering waterjet cnc services to CSR members for their personal use. To view it search "WATERJET" in the advanced search field. Thanks!

I was wondering what the best prop/pitch is for my boat. As of now I am running a 14.5" prop with 19 pitch, and of course i would like more top end, but not sacrificing getting out of the hole. I was wondering what everyone is running at WOT (wide open throttle) with their boats, and what is a...

I have and almost new 21 Pitch Mercruiser High Five prop that I am interested in trading for a same condtion 17 Pitch High Five Prop. I already have a 19P high five that is my all around prop and I want a lower pitch for those times that I am heavily loaded or high altitude. The 21P worked...