shifting

92 Sea Ray Sundancer 290 w/7.4 Bravo ll. When taking it out for winterization last yr the marina found a 2-3" crack in the outdrive behind the propeller. They said it didn't extend into the gear box so they gave me the option of having it welded or replacing the lower unit. I choose to have it...

Over the summer the starboard drive has been slow to drop into forward. The boat has about 320hrs on it. The marina have pulled the drive and inspected the clutch and gears - they provided the following comments: We have taken your stbd drive upper apart. Your STBD gear set is a 32/27 (32...

My 1999 330 sundancer has 7.4 ltr.EFI motors with v drives. When I shift to neutrtal to dock the boat the port engine will drop to 600 RPMs for a second then raise to 1200 RPMs. It will go there for about 2 seconds then back down to 750 RPMs. Then I can shift back into gear. If I shift it from...

I have an 88' 270 with OMC 4.3/Cobra. I was going out for a ride this weekend, started to plane out, and the starboard engine would only rev to 3500 rpm (my normal cruising rpm) that was with the throttle control wide open. The port engine was able to rev much higher. Both engines seemed to run...

I've owned my boat for 9 years and in the past month I've experienced something really strange. About a month ago I was returning to my slip and idling down the channel. I was backing into my slip and just shifted both engines in neutral when my starboard engine died. I restarted, but it...

hey everyone new to this site and any help would be great. i'm having a problem shifting back into neutral regardless of engine RPM shift cable are good. if i shut off the motor it slides right into neutral just doesn't work under a load (in the water only) i can see hydraulic lines going into...