fuel gauge

Hello this is my first year with “my” new 2005 290 AJ it has twin 5.0 mpi’s. I’m winding how my fuel use compares and if I have any sort of problem. Boat is running great and seems to be normal speed for rpm’s etc. at 32-3500 rpm’s I’m going around 25-28 mph. WOT I’m getting 4200-4400 rpm’s and...

I am needing replacement fuel gauges. Suggestions? That have a black face and do not have to be showing SeaRay logo.

Hello all. I'm new to the site. A master reset was done on MY 2004 280 Sundancer by the dumbass owner (smh) and now the fuel gauge does not work. I took my boat in to a certified MerCruiser mechanic who was able to get all the other gauges to work again, thankfully, but not the fuel gauge...

I am having some wiring issues on my Amberjack. The first one is the fuel gauge reads E all the time. (it has done this since I bought the boat) I took the sending unit out and checked it with an omh meter, I tested good when the float was moved up and down. I then checked the voltage on the...

I have an '04 240 Sundancer with the Mag 350. So my fuel gauge and speedometer are not working. They worked at the end of the season last year. On the first startup this spring they weren't. I replaced the sending unit. The fuel gauge is the last gauge in the order. The speedo is next to...

I just acquired a Sea Ray F16 with the Mercury Sport Jet 175 HP with two lingering troubles. The fuel gauge is new, wiring to gauge is okay and float is working, gauge reads fuel level when ignition is turned on, however the 12 volts drops within seconds. Anyone have a wiring diagram? The purple...

I need to replace a faulty fuel and alternator gauge on my 2001 Sea Ray 310 Sundancer. Does anyone know where I can find new or used replacement gauges for this model?

Hi All...new member here. I recently had to have the main drive coupler replaced on my 1994 230DA and once I got the boat back from the shop the fuel gauge no longer works. I'm wondering if there was a wire that possibly didn't get re-connected that I should look for? Also, any testing...

I have had a problem with my boat since bought in that it only comes off the full peg when about 15 to 20 gallons of fuel have been used. I have never let it get past registering 1/2 tank, but it seems to be working - just not accurate. Has anyone had this problem? If so, what was the cure...