anti foul

  1. TRG

    Bottom paint Columbia River at Portland Oregon

    I am purchasing a new to me 400 sedan that I hope will be here in about a week. I plan on pulling the boat probably at delivery to install a missing underwater exhaust outlet and also install the sheer bolts in both sides as it appears the remaining outlet is only secured by marine silicone. I...
  2. P

    Pacifica anti-fouling paint experience

    Does anyone have experience with Pacifica Plus anti-fouling paint on Mercruiser outdrives? Trilux 33 is not doing the trick. After 3 months in salt/brackish Gulf Coast water the outdrive is covered with barnacles and slime. Please comment on your experience. Thanks
  3. tompkin

    Fouling release coatings

    Hey guys, I keep my boat in a slip for 6 months a year (freshwater) and keeping the hull clean has been quite the task for me. At the start of a season I usually apply a coat of Collinite Fleetwax to the entire boat. Topside, I am having no issues but I notice after a month or two the wax on...
  4. K

    CopperCoat Antifouling - after one year in Tropical water

    Just an update. I put CopperCoat anti foul on my boat just over 1 year ago. And right now it is becoming boating weather again :) with temperatures dropping to acceptable levels. So here is the year 1 verdict : CopperCoat 1 : Sterndrive Paint 0 Sterndrives had normal spaycoat antifouling on...
Back
Top