antenna

Raymarine CAM210 New, installed but never used. I purchased this CAM210 had it professionally painted and installed, however it is incompatible with the G-Series system on the vessel. I had to remove it and install an older composite camera. It is brand new with all the connections, painted...

I've updated the sound system in my 1987 340 EC from OE Sony Shaft style to a Double Din. Looks great, but the original antenna appears to be the bow rail itself. Would like to use a Shakespeare mast antenna in place of the original Loran antenna. Has anyone tried threading coax cable from the...

The top of my VHF radio antenna on my 2006 Sea Ray 340 Sundancer struck a bridge superstructure while I was passing under it recently - and since then my radio will transmit (at least the marina office can hear me when I am in my slip) but won't receive. The antenna itself doesn't show any...

The top of my VHF radio antenna on my 2006 Sea Ray 340 Sundancer struck a bridge superstructure while I was passing under it recently - and since then my radio will transmit but won't receive. The antenna itself doesn't show any outward signs of damage. Does anyone have any ideas what might...

Just bought this boat a few months ago. Thank you!

The antenna is used, but the hardware including the amplifier are brand new, never used. I simply replaced the one on my boat with a 2030-G which did absolutely nothing to improve signal or raise the number of channels. It still works, and gave me the same amount of signal range and channels as...

Hey everyone, I just got a 310 Sundancer (love it) and I have a Shakespeare Seawatch Antenna on board that's wired to a black box (power amplifier?) and from there, there is a coax cable that goes to my DTV box, then to the TV. I get "No Signal", and I cannot figure out why. The TV coming from...

Unused Raymarine Raystar 125 Plus antenna that I never used. Will take 150.00 for it if interested. Thanks

I am only able to send and recieve on my Norstar NS100 at close range. The VHF performs the same when I completly remove the antenna cable from the main unit, so I am conviced I either have a bad antenna or a bad cable run to my antena from the VHF. I have checked all cable connections to the...

I have 2 questions about my '88 300 SD 1: I want to install a thru the hull transducer. Is the hull solid and therefore I can simply bond to the hull or is it cored and therefore I will need to do some digging first to get thru the core to the outer fiberglass layer? 2: My port 8ft antenna...