350

Greetings Sea Ray enthusiasts. I am having a pre purchase engine survey accomplished that will now be going into the second day. Two hours this morning to find why the power lift wouldn't work, corroded wire behind switch. The two surveyors spent the remainder of the day trying the get spark...

Hello, I had to change the relieve valve on my hot water tank, I decided to use the occasion to run the pipes to the engine room so I get hot water from the engine. I got the pipes in the engine room, now where do I hook to the engine? Caterpillar 3126 350HP Marine engine. Link to a video or...

Wanted to start a 350 SLX thread. I am on my third 350SLX and have just moved to Outboards and wanted to share my knowledge on the 350 SLX's as well as have a forum for others to share. Add yourself to the thread and share your pics. Here are my 2014,2016 and 2018 350's.

I acquired a project 1983 Searay 207. The original equipment Mercruiser 228 engine was a 305 V8. The sterndrive is a MC1 at 1.50:1. The engine is total trash. Only salvageable engine accessories are the alternator and starter. The boat is in lousy condition but I am having fun trying to put...

Please help. I've had a stall condition for the past two months. The onset comes on almost every time after 20 to 30 minutes of cruising. Boat will stall and not run when put into gear. I've cleaned fuel tank, installed new tank check valve, new fuel line, new points, plugs, cap, and wires...

65 watt alternator for Mercruiser 350 MAG MPI This is a low hour (~150 running hrs on boat when removed) used alternator from a '98 model year Mercruiser 350 MAG MPI powered boat. I had it professionally checked/cleaned and then kept it for a spare over the course of seven seasons and two...

Hello from Germany! My name is Bjoern, 35 years old, I live in Seesen (near Hannover) in Germany. I have owned some older Sea Rays before, my last one was a 1981 260 Sundancer. It did a good job but now I sold it away and on 21.12. I get my "new" old 350 Sundancer with two Mercruiser 254...

I have a 1987 260hp 350cu in my 87' 250 Sundancer. Just bought it this past winter. I have had a problem with the alternator belt squealing. I have to tighten the belt almost every time out. I am curious if anyone has changed the pulleys and installed a serpentine belt system. I hope to hear...

I'm missing the back aft bench. Any thoughts where to find one?