I just changed my risers, manifolds and spark plugs everything from the elbows down seemed fine. After starting the boat and taking it for a test drive I notice at very slow speeds near idle a knocking/studder noise coming from the engine. I didn’t have this problem prior to changing everything...
Hey Guys need a little advice. Had my 2010 240 Sundancer for a few months and loving it! Drained full 25 gallons of water in the fresh tank yesterday as I didn’t fill it so couldn’t trust it and no need carrying around a full 25 gallons. So ran galley and bathroom faucets to empty the tank. Had...
Just picked up a 2000 215 Express Cruiser as a project boat. Everything in good condition except no glass for the port-side curved section of the windshield. If anyone has one for sale, or knows somewhere to buy one/get one made for a reasonable price, please let me know.
I believe this same...
Same glass also fits following boats with Sea Ray Part Numbers:
215 Express Cruiser 95-01; SR# 821488 and 1566181
240 Sundancer 96-99; SR# 821488
250 Sundancer 95-97; SR# 801928
Hi Everyone,
I need the measurement for the lid of the "trunk" on the transom of my 2006 240 DA. My boat is 100 miles away and I'm unable to grab the measurement so hoping someone can help me out. The length and width would be awesome. More description on the part I need measured: The lid...
I would appreciate any advice on how to sell my future father-in-law's 1978 240 Sea Ray Sundancer with a 2005 LoadRite trailer. Should we restore it or sell as is? More information is located on the attached craigslist ad. Mechanically the boat is apparently in okay shape, but I have not been...
I have a 240 Sundancer with a portable toilet that is plumbed for a pump out. It also has the overboard macerator/pump out option which I cannot use because I am in the Great Lakes. Our portable is a 2.5 gal and fills quickly.
What do you think about adding a 20+/- gallon plastic storage...
After a sleepless two days of driving and sea trialing and driving some more, Piringa is on the Saint John River watershed and soon ready to launch. Some cleaning and hull buffing / polishing / waxing (already read the threads!) and we are ready to splash when the water level drops in the river...
Hi,
First post... taking delivery of 2000 240 DA next month. Hoping to moor her in the river outside the door ( 45°55'52.77"N, 66°36'52.58"W). River is wide slow, and relatively shallow (10' -15' average?) with a mud bottom at mooring site. Any idea how much weight I need to hold her...