Search results

Different Drum, Linda (I ate Rhode Island) Ronstat

If I change my 330 to 350 My storage guy will clip me for more cash. What I need is a LED Display to be a 350 at Sale time and a 310 when taking up real estate. Ever changing sizes for ever changing times!

That would depend on the mast height and depth of the water in the slip. A sure fire method would be to tell your neighbor that you are teaching your 7 year old to dock your vessel. He will move before sundown!:smt009

That is a fact. I have enough data now to warrant the wait. The sound of fibreglass grinding and cracking on steel isn't soothing. The admiral on the bow.............................Now that is worth a thought........................well maybe not. :thumbsup:

Yeah that ought to ring some bells! :grin:

I need to find my vessels height from the water line to the top of the arch. Where do I find an accurate size? It is a 98 Sundancer 330 with twin 7.4s IB. I do have a Raymarine radar which I would tack on to the known height. The admiral thinks??? THINKS we can fit the 11' clearance at South...

This is the driver for the radar. The unit I have now is: Thomson Airpax Mecharonics P/N S57L048S 7.5 Deg/Step 27.5 Ohms/Coil. Evidently Raytheon has these parts available for house repairs only. I will buy the entire dome radar in any condition to obtain a working stepper motor. Contact me by...

I sent the dome in last fall and it checked out good at Raymarine. I cleaned and reconnected the dome and it ran well every try in heated storage and after spring commissioning. Last week I fired it up and again "Antenna Not Rotating" comes on at the 47 seconds to go of a 70 second warm up. I...

Who if anyone makes or sells caps or covers used for covering a speaker cut out? My Arch has 4 caps that are off white and look ugly on the white. I'd like to replace them vs. painting.:huh:

Mine has met the end. Looking to replace it with same. email at kaji-13@hotmail.com Thanx.:huh:

No Genset.

That never even passed my mind Saturday. It sat in the truck doing absolutley nothing!:smt013

Must be early, I read the Marinco data and the bells started ringing. This plugs in to the recepticle and the my SP chord to it. Duh! BTW I ordered one from Wholesale Marine. Still making a pair of strap handles to lift that sucker if I ever fail while out. :thumbsup:

This will use a grounded extension from the out let or plug this into the outlet then use my standard shore power chord? I Have 2 Shore Power inputs. Do I need 2? Being Storage I only need to run the hatch and Charger through the winter. BTW thanx for the info. :smt038

Batteries are low and I can't open the Engine Room hatch. I have pulled the pin but I am concerned on how to lift the hatch door so I can grab it and lift. Pry bar comes to mind but I fear damage to the lip of the door even with a cushion. Any thoughts or prior successes? I will mount a strap or...

Unless they are huge the AF usually kills them before they get their belly full. BTW, my cat finds them everywhere and he works cheap.

Small bowl of Prestone AF. Won't keep them out but their plans are disrupted.

:grin: Thanx

What does it take to remove these without using explosives??:smt013 I have tried gently to move them and they seem to be attached somewhere I am not aware of?? I do not want to break them!! Any clues out there? Grrrrr!:huh:

98 Sundancer Twin 7.4's. Going into heated storage. First time with this vessel. I have a few questions. 1. How do I drain the AC and when? After Haul Out or Before? 2. Same with the fresh water. Where do I drain from? 3. Ice Maker? How to empty the water supply line? I expect draining the...