Can anybody tell me where the breaker box is for the windlass on my Sundancer (1991 42ft) the problem is I have no power going to my main switch on the dash. I replaced the toggle switch last year because it wasn't working and it worked fine. Went to use it for the first time this year and it...
Just wondering if someone can help me out with a hot water heater question. (We have a 1991 42 ft with cummins diesels) What I'm assuming is that the hot water has a duel system, one powered electrically and one powered from the heat off the engine. The reason I think this is because I have two...
Just wondering if anyone can tell me if you can use a bladder style holding tank on a vacuflush system? The current holding tank is too small and I have very little room to put a bigger one in its place. Just thought I'd throw it out there to see what you guys think.
Thanks,
Dave
Does this make sense,we were thinking of selling the boat last summer so I decided to have a pre sale survey done to help the sale move quicker. The surveyor found moisture in the transom but only from the water line down, fast forward to now we decided to keep the boat and do the recommended...
I have a problem and I need a quick answer, we are leaving on a five day vacation and I went to the boat today to make sure that all systems were working. To my surprise the head/toilet's got some problems.
Everything seesms to be working fine, it flushes, it vacumes fine, water stays in the...
We purchased our searay with a custom extended swim platform. We believe its life span is over. Now we are looking to replace it. Our question is what did the 42ft 1991 searay sundancer originally come with? We've looked on our original paperwork and it appears that it didn't have one. Any info...
Can anyone help me out on this, I have a 42' with diesel motors (1991), on my seacocks there are 2 handles, one is yellow and open and closes, the other is a tee handle that screws in and out, what does this one do?
I have V-drives with diesel motors and I need to re-pack the shaft seal. My question is: the space between the motor and one of the main stringers is really tight, I can barely fit my hand through it. Is there a special tool or technique that you need to make this an easier job.
Any advice...
Thinking of purchasing a 42' 1991 Sundancer at a local marina in Windsor ont. Canada. Is there anything I should be looking for or be aware of for this year and model?
Recently rebuilt motors, not sure of the make. Some minor repairs and maintenance are expected. But are there any majors issues...