Hi, im trying to take the throttle control out of my 96 sundancer. Does anyone know if I take the entire plate off if ill be able to pull the whole control out? I took out the wrong 3 bolts and the control came off the back but if I take the other 3 bolts out is the hole going to be big enough...
Hi, My anti-slip is pretty worn out and getting slippery, I want to add more grip to it without having to repaint the whole hull to match the color. Has anyone ever used a clear anti-slip paint? If not what options do I have? Thanks in advance
Hi, last year I purchased a 1996 Searay Sundancer 240. The boats in great shape but the non-skid surface is pretty worn down in the "high traffic" areas. I'm especially worried about the front deck because walking out to get the anchor or hook a dock line is pretty slick when wet. Can anyone...
I just checked the awlgrip website again and they don't have any dealers near me at all. I'm in Buffalo, NY and the closest dealer is in Canada or Michigan so I'll have to order online and won't be able to ask any questions in person.
That was going to be my next question was what types of paint are good? I looked at the awlgrip online and there are so many different kinds. I'm not picky I just want something that is fairly easy to apply that will last the longest. Has anyone used something and had good results?
Thank you everyone for the help! I think I will go the route of removing the old paint and repainting it. I can do the prep work myself and I have a cousin that paints cars who can spray it for me. It sounds like this will be the best course of action or I will be chasing this problem for years...
I've also wondered about the color difference because even if I feathered it out and clear coated it or something it would still show. If I can get this layer of, whatever it is, off is there anything you could recommend I repaint over it with? Or what should I do with it?
Ok, thanks everyone. You've made me feel a lot better about not having to re-gelcoat the boat. Would it make sense that if I stripped whatever this product is off that my gelcoat underneath would not be glossy? When I run my hand across where its coming off it feels kind of rough. Would this...
Thank you everyone for the replies! Lazy Daze is looked it up and KBS coatings. It does seem like that could be what is wearing off. I'll look more into it but I have found another spot and areas that if you catch the angle right you can see where the gloss is starting to wear down. If this...
I didn't know wax was applied that thick? Would the wax come off and change the color like that? I hope thats all it is because I can compound, polish and wax. I'm just afraid its the gelcoat itself.
Hi, I'm having an issue and im not sure what is going on. I just pressure wash it for the end of the season and it certain spots it looks as if the shine of the gelcoat is coming off. I just got this boat over the summer so I don't know what has ever been done to it. Does anyone know what this...
I got them working by pumping them up and down manually and also using the switch. They must have just been stuck and finally jarred loose when I was pumping them with my feet in the water.
Ok. I called Bennett and they said to check at the pump to make sure there is a steady stream coming out with no air and then do the same at the actuators. If its not that then have to take them apart like you said.
Thank you for responding, I did all the troubleshooting with the wiring and everything worked. I pushed on them and got them to go down and spring back up manually so they don't appear to be stuck?
Hi, I just bought a 96 sundancer and the trim tabs won't go down. At first I checked the fuse and that was blown so I changed that. After that the pump ran but had no fluid in it so I filled it and tried again. Still nothing so I crawled in there only to find that the hydraulic line for the port...