Search results

  1. 4

    2000 Sundancer 340 rich idle

    It has 7.4 MPI’s and the port engine is running a little rough and rich at idle. I replaced the idle control exhaust sponge. I just installed a new iac on it today, all to have the same problem. When easing into the throttle throttle when out of gear, it starts jumping at the 900ish RPM range by...
  2. 4

    Westerbeke 5.0MCG

    Anyone else ever have an issue with the oil pressure light coming on with these? Runs for about 30 seconds and shuts down. It has plenty of oil. I pulled the filler lid from the valve cover and it’s pumping plenty of oil. Not sure what the issue is. Maybe the sending unit? Any help is appreciated.
  3. 4

    Hurth HSW630 slipping

    Having a strange situation with my starboard unit. I was out 2 weeks ago and cruising at roughly 2900RPM. Trans started slipping and wouldn’t engage F or R. I let it sit for roughly 10 minutes as I limped back on the port unit. When I tried it again, it worked fine. Got back to the dock and the...
  4. 4

    Need carb for Westerbeke

    Does anyone know where to source them? The only number I can find to identify it is c013f. Sorry to be so vague in my search but I’m really lost here. I purchased the boat as a project for very cheap. Many of the items were stolen off it and this is one of them. It’s a 95 330DA and I’m pretty...
  5. 4

    330DA cables

    Does anyone know which cables I need for my 95 330DA? My port throttle cable is shot and I would really like to use the old one to fish the new one through. Problem is, I’m not sure which cable I need without measuring it. Thanks in advance for your help!
  6. 4

    Westerbeke Identification

    Forgive me if this has already been asked but how would I be able to identify which model my generator is? I’m pretty sure it’s a 4.5 kw generator but I’m not sure. It’s in a 95 sundancer 330.
  7. 4

    Transmission ratio prop pitch/diameter on Vdrive

    I have a 95 Sundancer that I purchased as a project. It came with the Hurth 1.56:1 tranny and they both needed replacing. I couldn’t find 2 of the same ratio that were in my budget so I had to go with two 2.0:1 transmissions. The props on the boat are 17x16. I never drove the boat before so I...
  8. 4

    330DA seats

    I purchased a 95 330 Sundancer last year and it didn’t come with the back or side seat platform. Does anyone know where I may be able to source one of these? I’ve searched everywhere and had no luck at all. I can make out without the little side seat but definitely need the back seat platform...
  9. 4

    95 Sundancer 330 swim platform.

    I know it’s a long shot but thought I’d see if anything is out there. There are other options but I prefer the one that came on the boat, we’ll most boats...except mine.
Back
Top