Fairly new to boating but know engines and my question is although I know you really always want OEM equipment when possible, it is always crazily more expensive. I have an inboard carbureted 5.0 liter Mercruiser and I would like to replace the Distributor and Coil along with the fuel pump...
If anyone has any tips or suggestions on how to remove these panel pads around the cockpit of my boat it would be greatly appreciated. I removed all the other seats and backs in the entire boat and it took some work but they are re-covered and ready to be screwed back in. The only thing I have...
I guess I'll find out tomorrow when we go in there and try and get those off. It seems like with the bottom seats out it should be easy to find out if it's going to be a killer or not LOL.
I am recovering my seats and have taken out and redone all the bottoms, so the easy ones are out and done. I also took out the seat and back on the engine cover and re-did those. My question is I had to take nuts off the lock-bolts on the engine over seats and is that how I get the seat backs...