Search results

2005 sundeck 240 5.0 mpi. looking at the vessel view mobile app or a link directly from my smartcraft gauge to a phone or tablet. I find my sc gauge difficult to read in the Florida sunshine and am hoping this will improve the readability of the smartcraft info. Any thoughts on this ? Thanks ...

2005 sundeck 240 5.0 mpi bravo 3 . Got a water pressure Sensor fault ( not low pressure ) Cannot Identify / locate sensor. engine is cooling properly, just don't know where sensor is. thermostat housing has 2 components on it . the on the right in pic i believe to be temp. sending unit with 2...

2005 5.0 mpi. Looking to replace this plastic plug on the thermostat housing. Is there a better choice than plastic ? Also , are there other plugs of this type on the engine I should look for and replace ? Thanks , Pete

I have a 2005 240 sundeck . The bow anchor locker is hinged on the back of the hatch not on the side like on later models. I find the rear hinge to be awkward to use and want to move the hinge to the port side. Does anyone know if they simply moved the hinge or if it was a redesign. A picture of...

2005 mercruiser 5.0 mpi. Smartcraft oil temperature sensor alarmed out showing 32*F. all other gauges are normal . anyone had this experience and where is sensor located. thanks , Pete

Trying to find a link to a tilt /trim unit for a 2005 240 with a 5.0 mpi. Specifically the valve body diagram. complete part number for the pump assembly is 865380A25 Thanks, Pete

Trying to hook up a subwoofer to the factory subwoofer RCA plugs . No sound comes out and i am unable to access the sub volume control via the instructions in the units owners manual. Any experts here ? Pete

2005 Bravo 3 outdrive won't trim down between uses (weekly) without standing on drive. Cycle a couple of times and works for the rest of the day until next outing . Up works fine. Fluid topped and cylinders and seals appear fine, Thanks , Pete

Trying to get proper flushing procedure for flushing a 2005 sundeck 240 5.0 W/ bravo 3 while on the trailer . My understanding is to close seacock and connect to adapter hose on engine topside. at this point adapter is broken. Can i replace adapter with a standard hose fitting and cap to flush...